Home > ACCESSORIES > RIFLE PARTS > AR15 PARTS
Sort By:
Page of 2
556/223 Crush Washers
Our Price: $3.79
308 Crush Washers
Our Price: $4.24
AR15 Carbine Buffer Springs
List Price: $7.99
Our Price: $7.99
556/223 Crush Washers 308 Crush Washers High quality Buffer spring for AR-15 / M4 Carbine constructed from certified chrome silicon spring wire.
Buffer 3.0
Our Price: $14.99
RIfle Gas tube & Pin
Our Price: $15.99
AR15 Charging Handle
Our Price: $24.99
Buffer 3.0
AR15 carbine buffer weight is a fundamental part of the cycling operation of any ar15 carbine.
In general terms, the shorter the barrel the heaver the buffer that is used.
But with many people doing custom builds, as well as barrel gas ports having a wide range it is common for guns to be over gassed or under gassed.
Another issue is if you are shooting standard load 223 Remington or full NATO load .556x45 ammo.

RIfle Gas tube & Pin
Hardened, stainless steel gas tube comes pre-formed with the correct bends and ready to replace a damaged tube or for your new build.
AR15 Charging Handle



The L5 AWM is a hybrid magazine that combines the best features of polymer and steel magazine designs.

Unique to the AWM is the one piece wrap-around hardened steel feed lip assembly that is permanently attached to an impact resistant polymer body. The hardened steel feed lips won’t bend, break or deform due to rough handling or long term storage.

An aggressive surface texture has been applied to the polymer body to improve gripping and retrieval from pouches. The combination of steel and polymer result in a lightweight, robust magazine tough enough for professional use.

The internal geometry of the Advanced Warfighter Magazine is a constant curve that has been maximized to feed the 5.56X45mm NATO round and has a non-tilting follower for trouble-free feeding. The feed lips are made from a single piece of precision formed steel that is hardened, then PTFE coated for corrosion resistance. The body and component materials are corrosion and chemical resistant, passing military chemical testing, including exposure to DEET.

The L5 AWM is compatible with modern weapon systems; M4/M16/AR, HK416, SCAR-L / Mk16, and the ARX160 to name a few.

The differences between the L5A and the AWM mags are that the AWM has larger, wrap-around steel feed lips, texturized mag body, anti-tilt follower, more resistance to DEET and other chemicals, no rubberized baseplate, introduction of additional translucent and opaque colors.

The AWM is a little more utilitarian, with a rough textured body and a hard-plastic baseplate whereas

ALL MAGAZINES PERMANENTLY PINNED/RIVETED TO 5 ROUNDS WITH COUNTERSUNK RIVETS
CANADIAN SALES ONLY

Heavy Buffer H1
Our Price: $34.99
Heavy Buffer H2
Our Price: $34.99
AR15 M4 6 POSITON BUFFER TUBE AND NUT
List Price: $35.99
Our Price: $35.99
AR15 carbine buffer weight is a fundamental part of the cycling operation of any ar15 carbine.
In general terms, the shorter the barrel the heaver the buffer that is used.
But with many people doing custom builds, as well as barrel gas ports having a wide range it is common for guns to be over gassed or under gassed.
Another issue is if you are shooting standard load 223 Remington or full NATO load .556x45 ammo.

AR15 carbine buffer weight is a fundamental part of the cycling operation of any ar15 carbine.
In general terms, the shorter the barrel the heaver the buffer that is used.
But with many people doing custom builds, as well as barrel gas ports having a wide range it is common for guns to be over gassed or under gassed.
Another issue is if you are shooting standard load 223 Remington or full NATO load .556x45 ammo.

MIL SPEC 6 POSITION BUFFER TUBE WITH CASTLE NUT
Ar15 Low Profile Gas Block
List Price: $59.99
Our Price: $59.99
Sale Price: $44.99
Savings: $15.00
Heavy Buffer H3
Our Price: $44.99
Ar15 Low Profile Gas Block
AR15 carbine buffer weight is a fundamental part of the cycling operation of any ar15 carbine.
In general terms, the shorter the barrel the heaver the buffer that is used.
But with many people doing custom builds, as well as barrel gas ports having a wide range it is common for guns to be over gassed or under gassed.
Another issue is if you are shooting standard load 223 Remington or full NATO load .556x45 ammo.

Ambi AR15 Safety Long&Long
S&J hardware
CNC machined Ambi safety

Linear Comp NLC-2
Our Price: $54.99
Linear Comp SLC-1
Our Price: $54.99
Linear Comp NLC-1 Nano Linear comp .762 Linear Comp NLC-2 Linear Comp SLC-2
Linear Compensator NLC-1
Our Price: $54.99
Linear Compensator NLC-1 Linear Comp SLC-1 standard Linear Comp
M4 Mil Spec 6 Position Buffer Tube

Gladius 223/556 1/2x28
Our Price: $99.99
Sale Price: $64.99
Savings: $35.00
Ar15 Low Profile Gas Block
CNC Machined from solid 4140 carbon steel bars. The Gladius has a Black Nitrocarburized case hardened finish. Hardened to 70 Rockwell. Muzzle Brake dimensions are 2.400 Long X .875 in diameter.
(AMS 2753). Comes with crush washer.

LIMITED LIFETIME WARRANTY

Limited Lifetime Warranty:Spatha Tactical and it's authorized dealers/distributors, subject to the conditions, exclusions and limitations that follow, warrants to the original purchaser of Spatha Tactical manufactured products to be free from defects in materials and workmanship. “Original Consumers” are the original purchaser of the product and the owner of the firearm in which the product is installed.
M4 style 6 Position Stock Set - TAN
M4 style 6 Position Stock Set - BLACK

PRODUCT INFO

CNC Machined from solid 4140 carbon steel bars. The Gladius has a Black Nitrocarburized case hardened finish. Hardened to 70 Rockwell. Muzzle Brake dimensions are 2.400 Long X .875 in diameter.
(AMS 2753). Comes with and crush washer.
Made in Canada
AR15 Lower Parts Kit -AMBI SAFETY
This lower receiver kit includes everything needed to build a complete a lower receiver, less a stock assembly and stripped lower receiver of your choice. All parts are made to standard military specs.

  • Zero Creep Single Stage 1911 like action

  • Frictionless Release Technology (FRT)™

  • Straight drop-in to .154" pin (not applicable for .169" Colt)

  • Choice of Curved Trigger Lever or Straight Flat Face Trigger Lever

  • Adjustability from  2 to 5 lb with unique design providing feedback indications

  • Enhanced Reset Control™ capabilities with a patent pending design

  • Optimal hammer spring and geometry for the highest possible performance

  • All Stainless Steel 440C internal components with 6061 aluminum anodized housing
  • MADE IN CANADA

The new Patent Pending NEAG Inc Compact Carbine Stock (CCS) is the ultimate solution for close protection guns: a collapsible stock which renders the NEA-15 7.5” PDW only 21 inches in overall length - nearly 2 inches shorter than a fully collapsed MP5A5, with proven 5.56m NATO performance.
A true collapsible stock with a total weight of only 1.5 lbs; only 1oz heavier than a traditional 6-position carbine stock system with buffer and spring.
The minimum length is a scant 4.75”, while the fully extended CCS stretches to 8.5” for maximum ergonomic range even on rifles designed expressly for extreme compact size. Materials are 6061-T6 Aluminum and 4041 steel with NEA’s proprietary ARC+ surface treatment.
The NEAG Inc CCS is the final evolution of a project intended to provide end users with the ultimate in rifle portability and concealability. Features a single point sling point. These do not work with piston driven AR's.


INCLUDES
Stock Assembly,
Return/buffer system (5.56mm/.223 cal)
Modified bolt carrier.
Does NOT include bolt, firing pin, cam pin or firing pin retaining pin.



SPECS
Weight : 1lb 8oz (0.68kg) Material : 6061-T6 and ARC+ treated 4140
Length Collapsed : 4.75” (121mm)
Length Extended : 8.5”(216mm)


MATERIALS
Carrier:
8620 Tool Steel, ARC+ Nitrided
Stock:
6065-T6 Aluminum, Milspec Type3 hard Anodized (black)
4140 steel, ARC+ Nitrided

Butt Pad, Polymer